SERENITY - Oct 10 2005

101001.jpg
101001.jpg

More sections added. Oh 0.010" styrene was used here. The thinness allowed it to conform to most curves

101002.jpg
101002.jpg

101003.jpg
101003.jpg

Marking of the lowest section

101004.jpg
101004.jpg

Styrene sheet added

101005.jpg
101005.jpg

101006.jpg
101006.jpg

Now to add the various detailed sections. Front part first

101007.jpg
101007.jpg

Then rear section

101008.jpg
101008.jpg

A strip was glued to the front section and positioned on the part using the guide lines marked on the main part

101009.jpg
101009.jpg

The rear section is now glued on

101010.jpg
101010.jpg

After this was left to dry it was filed to shape.

101011.jpg
101011.jpg

Closeup. One down

101012.jpg
101012.jpg

The cove bottoms were cleaned up and glued in

101013.jpg
101013.jpg

101014.jpg
101014.jpg

The other side

101015.jpg
101015.jpg